If you’re looking for a 2011 F150 blend door actuator diagram, you’ve come to the right place. At FordPartsGiant.com, we have a wide selection of diagrams to choose from, so you can find the perfect one for your needs. Whether you’re looking for a simple overview or a detailed schematic, we have what you need.
If you’re having trouble with your 2011 F150’s blend door actuator, this diagram should help. The actuator is located on the left side of the dash, near the fog light switch. It’s a small black box with two wires coming out of it.
Credit: www.f150forum.com
Where is the Blend Door Actuator Located on 2011 Ford F150?
The blend door actuator is located on the HVAC housing assembly on the 2011 Ford F150. The actuator is a small motor that moves the blend door to direct airflow through the heater core and evaporator core. When the actuator fails, it will usually cause the temperature control for the HVAC system to fail as well.
How Many Actuators are in a 2011 F150?
There are four actuators in a 2011 F150. They are located at the front and rear of the vehicle.
How Do You Reset the Blend Door Actuator on a 2011 Ford F150?
When your 2011 Ford F150’s blend door actuator malfunctions, it can cause the temperature control for your HVAC system to stop working. This can be a real problem in both hot and cold weather. Fortunately, you can reset the blend door actuator pretty easily, and this will usually fix the problem.
First, locate the fuse box under the hood of your truck. Once you find it, look for the fuse labeled “HTR/AC” and remove it. Next, disconnect the battery by removing the negative terminal cable.
Wait about five minutes before reconnecting the battery and replacing the fuse.
Now start up your truck and see if the temperature control works properly. If it does, great!
If not, then you may need to replace the blend door actuator itself.
Are There 2 Blend Door Actuators?
Are there 2 blend door actuators?
The answer is no, there is only one. The blend door actuator is located on the passenger side of the vehicle, behind the glove box.
It is responsible for controlling the flow of air through the HVAC system. If your vehicle has dual zone climate control, then there will be two of these actuators, one for each side.
Man Tips: 2011 Ford F150 AC Blend Door Actuator Replacement
2011 F150 Blend Door Actuator Fuse Location
If you’re having trouble with your 2011 Ford F-150’s blend door actuator, you might be able to fix the problem by checking the fuse. The fuse for the blend door actuator is located in the central junction box, which is under the driver’s side of the dash. Once you’ve found the fuse, you can test it with a multimeter to see if it’s blown.
If it is, simply replace it with a new one and see if that fixes the problem.
2011 F150 Blend Door Actuator Location
If you’re looking for the 2011 F150 blend door actuator location, you’ve come to the right place. This helpful guide will show you exactly where to find it.
The blend door actuator is located on the passenger side of the dash, just behind the glove box.
To access it, first remove the glove box by depressing the two latches on either side and swinging it down. With the glove box removed, you should see the actuator mounted to a bracket behind it.
There are two screws that hold the actuator in place – one at the top and one at the bottom.
Remove these screws and carefully pull out the actuator (it may be a tight fit). Once removed, you can access and replace the blend door as needed.
How to Replace 2011 F150 Blend Door Actuator
If your Ford F-150 is having trouble with the temperature of the air coming from the vents, it may be due to a problem with the blend door actuator. The actuator is responsible for controlling the movement of the blend door, which regulates the mix of hot and cold air that enters the cabin. If your truck is still under warranty, you should take it to a Ford dealer to have them fix the problem.
However, if your truck is out of warranty, you can replace the actuator yourself. Here’s how:
1. Start by opening up the glove box and removing everything from inside.
There are two screws holding it in place – remove these with a Phillips head screwdriver.
2. With the glove box removed, you should see a black plastic housing behind it. This houses the blend door actuator (it will have a white clip holding it in place).
3. Use a flathead screwdriver or trim panel tool to pry off the white clip, then pull out the old actuator (it will be attached to two wiring harnesses). Be careful not to lose any of the small parts that fall out when removing it!
4. Take your new actuator and plug it into both wiring harnesses.
Make sure all of the small parts are back in their rightful place before putting everything back together again (the order doesn’t matter too much as long as everything goes back where it came from).
How Many Blend Door Actuators in 2011 F150
If you have a 2011 F150, then you have two blend door actuators. One is located under the dash on the passenger side, and the other is in the center of the dash on the driver’s side. Both actuators control the airflow for the entire vehicle.
The passenger-side actuator controls the temperature of the air coming into the cabin, while the driver-side actuator controls boththe temperature and direction of airflow.
Conclusion
If your 2011 Ford F-150 is having trouble with the temperature control, it might be due to a problem with the blend door actuator. This helpful diagram shows where the actuator is located and how to replace it.
