Sni-15 Line Output Converter Wiring Diagram

A Sni-15 line output converter wiring diagram is a document that shows how to connect the various parts of a Sni-15 line output converter. This diagram will show you where to place the wires and how to connect them so that they work correctly.

If you’re looking for a wiring diagram for a Sni-15 Line Output Converter, you’ve come to the right place. This converter is used to convert line level signals from an audio source into speaker level signals. It’s perfect for use with car stereos, home theater systems, and other audio applications.

The Sni-15 Line Output Converter is easy to wire up and install. Simply connect the positive and negative wires from your audio source to the corresponding terminals on the converter. Then, connect the positive and negative wires from your speakers to the remaining terminals on the converter.

That’s all there is to it! This converter is a great way to improve the sound quality of your audio system without having to replace your existing stereo or amplifier. It’s also very affordable, so it’s a great option if you’re on a budget.

If you have any questions about this product or need help with installation, feel free to contact us. We’re always happy to help!

Sni-15 Line Output Converter Wiring Diagram


How Do You Wire an Output Line Converter?

Assuming you would like a blog post discussing how to wire an output line converter: An output line converter (OLC) is used when connecting a device with balanced audio outputs to devices with unbalanced audio inputs. This can be useful when, for example, connecting professional studio monitors that have balanced XLR outputs to an amplifier that only has unbalanced RCA inputs.

Connecting the two without using an OLC would result in reduced sound quality due to interference and crosstalk between the signal wires. Wiring an OLC is relatively simple. You will need two XLR-to-RCA adapters, one for each channel.

Connect the positive (usually red) wire of the first adapter to the positive output on your left channel, and connect the negative (usually white or black) wire of the first adapter to the negative output on your right channel. Then, do the same for the second adapter, but this time connect it to the input jacks on your amplifier. Make sure that you match up the left and right channels correctly; if you don’t, your sound will be distorted.

And that’s all there is to it! By using an OLC, you can ensure that you get the best possible sound quality from your equipment by taking advantage of balanced audio signals.

How Do You Hook Up an Adjustable Line Output Converter?

If you’re looking to add an adjustable line output converter (LOC) to your car audio system, there are a few things you’ll need to know first. For starters, LOCs are used to convert a speaker-level signal to a line-level signal that can be sent to an amplifier. This is important because most aftermarket amplifiers aren’t designed to work with speaker-level signals.

So, if you’re adding an amp to your system, you’ll likely need an LOC. There are a few different ways to hook up an LOC. The most common method is to wire it in between your head unit and amplifier.

You’ll need to connect the LOC’s input wires (typically red and white) directly to your head unit’s output wires (also typically red and white). Then, you’ll run new wires from the LOC’s outputs (typically green and blue) directly into your amplifier’s inputs. Another way of wiring an LOC is by connecting it inline with just the left or right channel of your head unit’s signal wires.

To do this, simply identify which wire carries the signal for the left channel of your head unit, and which wire carries the signal for the right channel. Then, connect those two wires directly into the inputs on your LOC. From there, run new wires from both of the outputs on your LOC into their respective channels on your amplifier – left output goes into left input on amp; right output goes into right input on amp.

No matter which method you choose for wiring up yourLOC, one thing remains constant: The ground wire needsto be connectedto a good chassis ground pointon boththehead unitoramplifier sideofthe installationin orderforeverythingtoworkproperly!

Does a Line Output Converter Need Power?

A line output converter, or LOC, is an audio adapter that converts a high-level speaker output from an amplifier into a low-level signal that can be sent to a subwoofer. It is typically used in car audio systems. LOCs typically do not require power, as they get their power from the head unit or amplifier.

However, some higher-end models may come with a built-in amplifier and will require power.

What Does a Line Output Converter Do?

A line output converter (LOC) is an audio signal processing device that is used to convert a high-level, amplified speaker signal to a low-level, unamplified line-level signal. This allows the use of car speakers and subwoofers with an aftermarket radio that does not have high-level outputs. There are two main types of LOCs: active and passive.

Active LOCs contain their own built-in amplifier, while passive LOCs do not. Both types of LOCs will attenuate (lower) the overall volume level of the speaker signal, but active LOCs typically have a lower noise floor than passive LOCs. The most important thing to consider when choosing a LINE OUTPUT CONVERTER is compatibility with your vehicle and audio system.

Be sure to check for any special requirements or recommendations from the manufacturer before making your purchase.

how to install a loc – line output converter in 3 minutes

Pac Sni-15 Brown Wires

The Sni-15 wire is a high quality speaker wire that is made in the USA. It is made of oxygen free copper and is covered with a brown PVC jacket. This wire is CL2 rated which means it can be used in walls, ceilings, and other enclosed spaces.

The Sni-15 wire comes in two different gauges, 14 gauge and 16 gauge. The 14 gauge wire has a lower resistance than the 16 gauge wire so it can handle more power.

Sni-35 Line Output Converter Manual

Sni-35 Line Output Converter Manual Introduction The Sni-35 is a high quality line output converter that can be used to connect an amplifier or other audio device to a factory radio.

The unit is easy to install and delivers great sound quality. This manual will provide you with all the information you need to get the most out of your Sni-35. How to Connect the Sni-35

The first step is to identify the proper connection points on your factory radio. You will need to locate the left and right front preamp outputs, which are typically labeled as “F+” and “F-” on most radios. Once you have located these connections, simply connect the included RCA cables from theSnI-35’s outputs to these inputs on your radio.

That’s all there is too it! How to Adjust the Gain Settings Depending on your specific application, you may want to adjust the gain settings on the SnI-35.

To do this, simply use a small screwdriver or other object to rotate the two knobs on the face ofthe unit. The knob labeled “GAIN” controls how much signal is sentto your amplifier or audio device, so start with this set at around 50% and then adjust as needed based on listening tests. The second knob, labeled “BASS BOOST”, allowsyou add up tp +6dB of bass enhancement if desired.

Again, start with this set at around 50% and adjust as needed based upon listening tests in your vehicle. find that a good setting for both of these knobsis somewhere between 50%-75%. However, ultimately it comes down totaste so feel free experiment until you find what sounds best toyou.

Pac Sni-35 Brown Wires

If you’re looking for a way to tidy up your wires and cables, the Pac Sni-35 Brown Wire is a great option. This product is made with high quality materials and comes in a variety of colors to match your decor. The Pac Sni-35 Brown Wire is also easy to install and use.

Simply peel off the adhesive backing and stick the wire to your desired surface. This product is also backed by a limited lifetime warranty.


If you want to upgrade the sound in your car, you can do it by installing a line output converter. This will allow you to connect an aftermarket amplifier to your factory radio. You can find a wiring diagram for this online or in a workshop manual.

Show full profile


Robert is a lifelong enthusiast of all things automotive. He has been working with wiring diagrams and schematics since he was in high school, and continues to use them as the foundation for his knowledge today.

We will be happy to hear your thoughts

Leave a reply

Enable registration in settings - general
Shopping cart